Internet Computer Mobile Games

Tech Help

144050 Posts - Page 2 of 7203

Autoradio HONDA Pilot (2009 – 2012)

Autoradio HONDA Pilot (2009 – 2012) avec fonction GPS, écran tactile 6.2” & Bluetooth I need these specs, could you help me with this? Autoradio GPS HONDA Pilot 7 compatible DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEGUSB/SD/Ipod avec Ecran tactile et les fonctions TV et radio AM/FM intégrées.

Placing Projector In Front of You?

Thinking about getting a Benq 1070 and mounting it on the ceiling. We've always had our projectors mounted on the wall directly behind us. We're used to hearing the hum of a projector and such, but we've never had one ceiling mounted in front of us. How, if any, distracting is placing the projector slightly in front of the main seating area? Does light leak on the ceiling? Does the general population of those who care about aesthetics (i.e. wives, girlfriends, significant others) care about see

TV IR Remote Poor Signal/Reception

Hello I have a 22 inch Vizio TV and the remote control function has never worked satisfactorily. Doubt it will matter too much but I can get the model details if it matters. The problem is the reception of commands is poor. Have to move the remote all around to get the signal in even when pointing directly at the infrared receiver on the lower left side. Distance between remote and TV is less than 10 feet. Even at point blank range reception and recognition of command signals is spotty. I

Better CPU or better GPU?

Posted by Cxzcxz3 in Systems > Part List Opinions Wanted:Core i5 with gtx 750 Ti or core i3 (or AMD chips) with gtx 960 another question: will a core i3 bottleneck with a gtx 960?

Good PC for Minecraft, Football, and Sim City

Posted by jennpete in Systems > Create A Part List For Me:My son wants a computer for his birthday, with 2 monitors 20"+. He likes playing Minecraft, a football game, and SIM City. I want to buy a nice enough one that will last him a couple years, but not break the bank. I assume he will be playing first person style games in the coming year or two, so want enough room for growth. Willing to spend $400, $600, $800 or even a $1,000, but want best return on money over a 3-4 year period. Bette

First build, need suggestions

Posted by YellowSnowCone in Systems > Part List Opinions Wanted:Saving up for a gaming PC that will run fallout 4 very well when it comes out, this is what I have come up with so far, I would like it to be upgradable. I would just like to know if it is going to run games well, or if I can save any money easily while loosing minimal performance. Thanks

Any suggestion? 2500€ all-in gaming/multi-media pc

Posted by Olimar in Systems > Part List Opinions Wanted: any advice is welcome! (first time pc-build)

1080p gamiing rig for £400 to 500

Posted by needrl in Systems > Create A Part List For Me:was just bout to order some parts to build a rig which I had had some grate help with in the other page of this forum but justI realised I would be using my TV and not a top end monitor, so asking for advice as think I could be a bit over kill ok want to build a rig for playing on my TV and only have £400 could go to £500 but is it worth it. as only playing at 1080p. so please lets see your ideas, £500 would have to include OS and yes a opt

How tessellate in Edit mode?

I need tessellate a face, and in OBJECT mode works, but if you create a new face in EDIT mode, I cannot use it before back to OBJECT mode. The problem is that mymesh vertices does not contain the new vertex, so I was thinking to use BMESH, but the tessellate needs a mesh as first parameter. How can get this? Here an example of my idea: Code: if myobject.mode != 'EDIT':   mymesh =   # Tesselate the polygon   tris = mesh_utils.ngon_tessellate(mymesh, myvertices)&n

Spinosaurus Aegyptiacus

Hey guys, for a long time now I worked at a Spinosaurus because its my favourite dinosaur and I wanted to create it in Blender. I hope you like it and tell me your thoughts about it. constructive critique is welcome ;) Attached Thumbnails  

Project vertices from low poly to high poly

I have a low poly and a high poly mesh. Now I want to project/snap some of the low poly vertices (along their vertex normals) on to the high poly surface, so they better match the high poly model. Does blender currently support this or would I have to write an addon? I know there's snap to mesh, but I don't want to individually snap each vertex manually.

Pocket Watch

Just a pocket watch I made in Blender, in cycles, 200 samples. The chain was placed with rigidbody physics. It's one of the few projects I finished ^^ Enjoy! Any feedback is welcome. Attached Thumbnails  

[FS US]Keyboards and Mice

HEAT: Pricing is based on shipping to the lower 48! Tt eSports Theron Plus Smart Mouse $50 Shipped Tt eSports Ventus X $45 Shipped Tt eSports Poseidon Z Forged (Kailh Blue Switches)... [FS US]Keyboards and Mice

PC locking up recently.

I would load a website then it would lock up because it wouldn't click on anything and I would know if has locked up plus if I clicked on anything else, it would say "not responding" then after a few seconds, it would be fine. Why is this happening?

AMD Radeon R9 Fury X 4 GB

Introduction To say that AMD is at the forefront of new technology in the PC-graphics field is an understatement. The company rigorously pursues and in many cases introduces new technology into the PC consumer-graphics space. AMD's past two memorable technological breakthroughs in this space were Graphics CoreNext, a powerful new number-crunching machinery for... AMD Radeon R9 Fury X 4 GB

Proper fix for PhotoViewer bug in builds 10147 and up

After a little investigating I discovered that the problem with PhotoViewer opening with a print dialog instead of the image viewer was due to an incomplete registry key (missing "open" subkey). Executing the following .REG file solves this problem. Code: Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Applications\photoviewer.dll] [HKEY_CLASSES_ROOT\Applications\photoviewer.dll\shell] [HKEY_CLASSES_ROOT\Applications\photoviewer.dll\shell\open] "MuiVerb"="


Estimados, por favor podrían indicarme como solucionar lo siguiente:Anteriormente he instalado PfSense en otros equipos servidores virtualizado con Citrix - XenCentery todo tranquilo sin ningún problema, ahora al instalar me sale lo siguiente y ahí se...

SG-2440 "optimizations" lost when restoring from PC backup?

I have a shiny new SG-2440 to put in place of a home built PC running pfSense 2.2.3.  The SG-2440 has also been upgraded to 2.2.3 with the ADI image (clean install on my supplied M-SATA).Somehere (sales or in the forums) it was mentioned that the ADI ...

Jetway JBC373F38W-525 for 10 users

Thank you. That's what I was hoping to hear. I'm hoping to migrate them to another phone system in the coming weeks, so they shouldn't need the VPN connection for long.

Настройка правил firewall на резервном канале

Присоединяюсь к благодарности за рекомендацию. Вот только полно железа, которое п

Design Apple Development Security Automobile Network Photography Health Money Travel Shopping Issues Operating systems Drivers Software Programming Tech Home Science Sport Solution