Internet Computer Mobile Games

Trunk lid pop assist issues

In Automobile - Posted on Jul 02, 2015 19:21 - From: corvetteforum.com

Trunk lid pop assist issues

I know this thing was going to be a 30 second install but the original hardware screw and washer is too small for the spring. Mam I doing something wrong here?

I ordered it from corvette mods and thought it would be plug and play. Basically unscrew the bolt, slip spring on and re tighten bolt....?

Top similar posts to Trunk lid pop assist issues

trunk lid closure assist feature ?

Hi. Some time ago I purchased a simple little piece of powdercoated angle iron that attached underneath the bottom edge of the license plate, using those two screws to attach. The function is to give a grab-point to assist in closing the lid. If I recall, it was a Saab (cringe) item. My info on this seems to have expired and I would like to order another, for my wife's E46. Does anyone have P/N or other good info for this or similar? Bavauto claims no such thing exists, either from them or form...

1957 Trunk Lid Springs

Hello to all, I looked and could not find a post dealing with the springs that hold up the trunk lid on a 1957. I have one in the shop that sags a little bit and will not stay up all the way. I do not many C1's in the shop that often...so I am not aware if the trunk lid is 'supposed' to drop a little and NOT stay all the way up when opened. I am curious if anyone has any suggestions. I do not have a problem in replacing them if they are available (have not looked yet).....OR If someone ...

Anyone having Moto Assist/Actions issues?

So, after having my new Moto X for a week now, I still REALLY love the phone. It's just so fast. I was really excited about the Moto Actions/Assist features and the first day or two, they worked flawlessly but now, it seems spotty. Anyone else having problems? Moto Assist Home - First two days worked great. Recognized as soon as I was home and read out all texts and calls. Now it may come on for a few minutes. It may read a text but the majority of the time it doesn't recognize home. I checked ...

Pop promotion/demotion/issues changes formula

I'm trying to understand how the Promotion Factors and the factors affecting issues actually end up as pops that are promoting/demoting/immigrating etc... It's not clear how the percentages listed in the tooltips actually correspond to the final numbers. The closest post I could find is here: http://forum.paradoxplaza.com/forum/...motion-formula where Naselus talks about "promotion scale" but he did not respond the follow up question. What exactly is the promotion scale and in which ...

trunk lid questions

Hello, having just purchased my 528i T, there are so many things I am trying to understand. Are there multiple options for the tail gate lid such as manual lift and automatic? How can I tell what I have. There appears to be some sort of electrical operation, but I am unsure of how it is supposed to operate. I have been opening it manually. And closing it manually, but it takes some force to lift it all the way up. ...

E60 (03-10) Want to Buy Looking to purchase E60 LCI Front & Rear Bumper, Headlight Tail Lights and Trunk Lid

As the title states, looking to purchase the following LCI Parts - Front Bumper - Rear Bumper - Headlights - Tail Lights - Trunk Lid Thank you ...

Sleep/wake issues when opening lid on VAIO Flip 13 on Windows 8.1

Hi all . I bought a refurbished VAIO Flip 13 (Model # SVF13N17PXB) (one of the last lucky ones in the U.S to get the last few refurbished models with that config before VAIO shot down hehe) but I've been having issues ever since I  bough it (even the first time I booted up the computer without updating anything, using Windows 8.1 that came with the PC)  I don't know if it's a driver/BIOS problems or if I just have a defective model. So I was wondering if any of you guys have had a...

Sleep/wake issues when opening lid on VAIO Flip 13 on Windows 8.1

Hi all :hi2: . I bought a refurbished VAIO Flip 13 (Model # SVF13N17PXB) but I've been having issues ever since I bough it (even the first time I booted up the computer without updating anything, using Windows 8.1 that came with the PC) :( I don't know if it's a driver/BIOS problems or if I just have a defective model. So I was wondering if any of you guys have had a similar problem with your Flip 13s (I posted this question on the official sony community forums but nobody has replied so I'm p...

FS: E36 Dakar trunk lid/spoiler (714)

As the post title says. Very clean. No scratches. $180. ...

CT Looking for a white E30 trunk lid in The area

If you have one please PM me. Must be perfect or close to it. Thanks!!! ...

A suggestion to mitigate against the "pop up hell" issues driven by events

Ok devs. Again, you know I love you. Really. And, I know you've stopped development on this game, sadly. But, there's something you might want to consider addressing. That is the pop up hell that some events cause. This can really crimp play enjoymenting. So, here's a suggestion for a fix to this obnoxiousity. One quick fix that gives the player the option to set his or her response to a particular event and then let it run without further pop upityness. Might even put in a bit of a variable,...

Removing Trim on Trunk Lid

Are there any good writeups on how to remove the chrome trim on the trunklid right over the license plate? I've been searching but I can't seem to find any. ...

Camera issues???? Lets pop the bottle...!!!

***Please post hardware version.. **Board Model You can Use this App for info https://play.google.com/store/apps/details?id=org.uguess.android.sysinfo.pro This would give u your Camera info as well. PLEASE IF YOU SEE THAT YOUR INFO ITS ALREADY HERE DO NOT POST JUST GIVE A LIKE TO WHAT EVER INFO IS SAME AS YOURS LET TRY TO KEEP IT AS CLEAN AS WE CAN ...

91 Convet Trunk lid

Can anyone tell me if 2 drs, 4 drs, and convert trunk lids are the same? I want to delete 3rd brake lite on my vert, be easier to swap from a roof car than to do all that bodywork. thanks DD ...

Anyone else have issues with bubbling on the box lid?

by CityWithoutMen I picked up my copy from Miniature Market a few weeks ago and saw that along the edges of the lid, near the top, there was some fairly heavy bubbling along three of the four edges. I didn't think much of it until I was pulling the game out of my tote at game night and saw that the cover was torn about halfway down one side because the box art wasn't glued down properly. I contacted customer service and they said something like "We've never heard of this happening to anyone e...

Design Apple Development Security Automobile Network Photography Health Money Travel Shopping Issues Operating systems Drivers Software Programming Tech Home Science Sport Solution