Internet Computer Mobile Games

[Unanswered] EVA fails on Kerbal Space Program

Something I am doing is clearly wrong, because everytime I EVA from the surface of a planet/moon - I press space to release, but as soon as I press space I just fall to the ground and land like a sack of .....

Surely this is not normal - and I can actually EVA without falling to the ground first and somehow engage my RCS before I press space and fallout the pod and then gracefully land or even fly from where I am? What am I missing?

Top similar posts to [Unanswered] EVA fails on Kerbal Space Program

[Unanswered] 0.25 and EVA problems on Kerbal Space Program

Hello everybody. Honestly this is a problem I have had for a long time. But it has become intollerable in 0.25. The problem is that when I EVA in space my kerbal is always pointing in the wrong direction. As a result it is incredibly difficult to control kerbals with RCS. Prior to 0.24 I would avoid any kind of space walks, just eva, eva report, board and all was good, and in 0.24 I was able to do rescue missions with the odd quicksave, but now in 0.25 not only am I experiencing even more dificu...

[Unanswered] Eve interception trajectory fails on Kerbal Space Program

I have an issue with getting to eve, and it has been plaguing me since .23: Vessels that are supposed to enter Eve's SOI don't. To be more specific, I can make a vessel, put it into orbit, make an transfer burn headed for eve, and even a careful fine tuning adjustment once I've left Kerbin's SOI. After getting everything lined up, with the projected Eve encounter showing in the map view, and a nice close periapsis and everything, I go to the space center and time warp, as one does. However, he...

[Unanswered] Found new issue regarding EVA in Version 25 ... on Kerbal Space Program

When I try to perform an EVA in version 25 my kerbal starts out spinning into space and not attached to the ladder as before. I'm having to start my EVA out getting my pack on and getting back to the ship. Is there a new way of going out there still hanging on to the ladder?:blush: ...

[Unanswered] Going to EVA always releases the handle, how to fix? on Kerbal Space Program

Hi, Even when im in space, going to EVA my Kerbal starts flying, so I have to come back to the ship and enter. Interesting part is, that the moment I exit to EVA, Im being shown "press space to release", but then I'm automatically released... (and I repeat, Im in space, not accelerating, no air resistance). How to fix this? Thanks ...

[Unanswered] EVA Up/Down spacebar on Kerbal Space Program

How do you get a Kerbal on EVA to change orientation up or down when you press the spacebar. They seem to do it if I change camera modes but that's it. ...

[Unanswered] Multiple docking port fails on Kerbal Space Program

I've been updating my Arrow design, and with it the Longbow (see sig). I love the Mk2 inline docking port, so I've incorporated it into the design facing down, so now the Arrow attached to the Longbow by the two shielded ports on top and the inline port facing down. This design, while a bit more fiddly to dock with, is a much better design from an overall combined craft stability point of view, but I'm having the wonderful problem of only one or two ports wanting to attach at the same time, leav...

[Unanswered] EVA problem on Kerbal Space Program

Hello, this is my first topic! I'm having a bit of trouble EVAing my Kerbals. When I EVA in space, my Kerbal just floats of far away and I have to use a load of EVA fuel to get back. But I've been watching videos and some people go at speeds at 2000m/s and their Kerbals just stick to the door of the ship. Help? ...

[Unanswered] Jeb immediately flies off into space when he goes EVA from the Mk1 on Kerbal Space Program

A typical way I gather science is to periodically pop Jeb out of the command module, get an EVA report, collect the data from various scientific instruments mounted to the command module, and then get back in the module again. I just grabbed the 0.25 update a few days ago, and I am now having serious problems with this that almost make the game unplayable for me. Whenever my Kerbal goes EVA from the Mk1, instead of clinging tightly to the hatch ladder like he always has in the past, he either g...

[Unanswered] "Astronaut Complex upgrade required for EVA and samples"??? on Kerbal Space Program

So, I started a new career...and all of my buildings are fully upgraded....how to I now upgrade an upgraded building? I can't find any buttons or whatever to get through this...am I missing something? :wink: ...

[Unanswered] .90 EVA problem on Kerbal Space Program

I have had a problem with trying to do an EVA while in earths orbit with no propulsion active but when I do, my Kerbal gets out of the pod and releases his grip and starts floating away, but when I am grounded or landing with a parachute he hold on like no problem. What am I doing wrong??? ...

[Unanswered] Visual surveys: EVA surface ones on Kerbal Space Program

How in the hell you do these? The ones you have to fly over are easy, but these are just impossible to me. The most weird thing is that you don't have a marker in the normal view (Staging view); WHY??; the marker for the location is only in the Orbit Map so I cannot pinpoint the place in the final phase, I just go blind and I miss. I could just correctly set my trajectory to land there, but the trajectory line is always wrong when inside the atmosphere. And the trajectory mod doesn't work in 0.9...

[Unanswered] Get flung away every time I try to enter command module (EVA rescue) on Kerbal Space Program

I accepted a contract to rescue an orbiting Kerbal. Every time I press F to grab the command module ladder rungs, the RCS jetpack is turned off and I'm flung away from the craft. What's going on? I tried pressing F repeatedly in the hope I'd board but I just keep getting flung away and eventually I'm going to run out of RCS. I wonder whether it's related to the bug where I'm sometimes ejected violently from the command module when I initiate EVA. ...

[Unanswered] Contract; 0.90; Take an EVA from X [Where?!] on Kerbal Space Program

Hi, Guys. Long time no explode. I've upgraded to 0.90 and I'm working through Career Mode. I keep getting these "Take an EVA a [Kerbin] at [JBM-01]..." I can do the fly-over ones but, the ones that require an EVA from the ground I can't find! I walked around for an hour UNDERNEATH the (map) arrow on one and couldn't complete the contract. -Does the lander, itself, have to be in the area? -Is there an arrow/sign I'm supposed to look for? -What am I missing, here? Me frustrate! Hul...

[Unanswered] How do you move your scientist out of the lab to EVA? on Kerbal Space Program

Ok Hours in lots. Got my Kerbals in the orbiting Station with a lab. Got my Mun Permanent Station ready to go. Just need to move the Scientist from the Lab to my Mun Lab. I see a nice list of everyone but the Kerbals in the Science Lab. I start screaming thinking that I left them on the ground. GO back to the pilot center and it tells me I did not forget them they are in the science lab. Sooooo... How do I move them to the other lab?? PS am I missing something? Why do I have to eva to move ...

[Unanswered] Wait, rover wheels can be repaired without a Kerbal engineer on EVA? on Kerbal Space Program

Until today I was under the impression unmanned rovers couldn't get their wheels repaired - you had to have a kerbal on EVA to do it, and with the latest update, the Kerbal had to be a qualified engineer. So I landed some unmaned rovers and electric planes in Duna, some 10 km away from the place I've selected for the base and some of their wheels got broken during landing. I tried to drive them with the broken wheels and, at one point, I right clicked on the wheel, and the option to repair it w...

Design Apple Development Security Automobile Network Photography Health Money Travel Shopping Issues Operating systems Drivers Software Programming Tech Home Science Sport Solution