Internet Computer Mobile Games

Can anybody here help with VPN configuration on a SonicWall TX-190?

We have a SonicWall TX-190 that's been in service on our network for several years. In the past, we haven't needed the VPN functionality, but an increasing number of our employees now telecommute, and the lack of a VPN severely limits what they're able to do from home.

I've already viewed Andrew Crouthamel's tutorial, but it raises a number of questions, particularly because it assumes a new installation, rather than activation of the VPN feature on an existing installation. In particular, near the end of the tutorial, he mentions that the VPN doesn't like having both ends of the tunnel at "zero" networks (I had to view somebody else's tutorial on network setup in order to even understand what he was talking about), but doesn't say anything about how to remediate that on a SonicWall that's already in service.

I've asked Mr. Crouthamel for more information on that, but haven't heard back from him. Likewise, I've tried to connect with SonicWall's own forum, but have been unable to do so, so far.

Can somebody help? I'm just a simple AS/400 applications programmer, not a network engineer! :banghead:

Top similar posts to Can anybody here help with VPN configuration on a SonicWall TX-190?

Sonicwall NSA Public IPs over VPN

I currently have a SonicWall NSA 3600 in my office. I am looking to move our servers into a data center. A bridged MPLS line would be the ideal setup, however due to cost I am looking into using a VPN connection.With the VPN connection, I would have the following:Site A: SonicWall NSA 3600 - subnet 10.1.1.x/24Site B: SonicWall NSA 3600 - subnet 10.1.20.x/24I have a server currently at site A that was a public IP address that is hard coded into a number of devices that will take some time to upda...

How to allow SonicWall SSL VPN through STS VPN

The client has a SonicWall firewall at each of two sites with a rather standard VPN set up between the two. SSL VPN is configured on both as well.Currently if I use the NetExtender SSL VPN client to one I can access systems at that site, but not the other.What I'd like to do is connect to the primary site and be able to access systems at the secondary site through that single VPN connection, so that we can more easily manage VPN client connections. Every time I try to look it up I end up finding...

Unable to access management through Sonicwall site-to-site VPN

So I have a NSA 220 on one end and a NSA 2600 on the other end of a site-to-site VPN. I know the VPN is working because I can remote desktop into machines on the other end and I have no problem. I also know that management is permitted through the VPN because when I try to connect to it, it successfully loads the first page with the frames, but when it tries to load auth1.html it freezes up and then fails with "The Connection was reset" on my Firefox. I've gone through everything I can, but I ca...

SonicWALL SSL VPN 2000 on a DMZ

Hi,I setup my SonicWALL SSL VPN on a DMZ with NSA 2600 appliance..There is already site to site VPN tunnels between offices.Users connect using NetExtender and they get access to the mainoffice, but they can't access other sites.I have X0 on the SSL connected to the NSA DMZ port with IPaddress 192.168.120.2, and the port on the NSA (DMZ) is 192.168.120.1.The IP Pool is 192.168.120.100 to .200. The main office networkis 192.168.123.0, other site is 192.168.121.0, and other is 192.168.122.0, andso...

Sonicwall NetExtender VPN - Static Route Needed

Good day,I am trying to provided assistance for adding a static route for a clients VPN connection. The VPN lands them on a DHCP zone (172.22.200.1 - 172.22.200.199), all /16 (Class B, 255.255.0.0).When the VPN is connected - no default gateway is listed. The INTERNAL gateway for the network is 172.22.1.1 for devices in the office. The gateway at 172.22.1.1 has a static route to a 172.25.x.x network (also /16).However, over VPN, it seems that the default gateway is the VPN appliance, because the...

Configuration VPN ppp0

I have a VPN-access to the some network. I use this vpn to access only for 10.3/17 and do now use for the external access. Its working on the Linux OS. My routing: But I can't configure this vpn on the mac. If external access is working vpn not, and if vpn is working external not. Please help me. My routing when vpn was connected: Option "All traffic through VPN" was disabled. Please tel how I must routing for working vpn && external access. ---------- I added a routing on...

Sonicwall New Site To Site VPN - No Traffic Moving

Good morning Spiceheads,Got another brainteaser here. Currently have a Sonicwall NSA 2400 running SonicOS Enhanced 5.9.0.6-3o and just got a site-to-site VPN configured. When I go into VPN, I can see that the tunnel is up, but there is 0 traffic moving between sites.Only real catch with this tunnel is that we have two WAN interfaces, and I have the tunnel configured to use the secondary WAN interface (X4). No matter what I try, I can't seem to get any traffic to even make the attempt to go throu...

Sonicwall SSL VPN

Hi, I'm having issues configuring the SSL VPN on the SonicWall. I have got to the stage where i can log into the net extender client on a machine and authenticate it. the client also tells me that it has been assigned an IP from the SSL IP pool. However I cant actually gain access to anything on the LAN. Can anyone help? For DHCP on the LAN we use a windows server not the firewall. Cheers in advance....

Extension based PRI configuration over VPN

Hi, We have 2 branches with cisco 2901 and VPN between them.Both the branches has PRI lines. My requirement is to make an extension based configuration so that if i dial say..300 from branch1 it should ring the phone on branch2. How do i accomplish this.Need your help guys....

SonicWALL Global VPN Client connects from some locations, not from others

Our branch offices connect in to our SonicWALL NSA 240 via the Global VPN Client (GVC) and it works fine. We also have a small number of mobile workers who try to use the GVC but with mixed success.Recently, for example, on a trip to the USA they could connect fine via the hotel Wi-Fibut not from the corporate HQ guest network wi-fi, which they were assured had unrestricted outgoing access! A few days ago my MD told me he couldn't connect from the airport while waiting for a flight.I've read hea...

Site to Site VPN, Sonicwall NSA2400, PFSense 2.1, Route traffic across VPN

I have successfully configured site to site vpn's between a sonicwall nsa2400 (primary location) and pfsense 2.1's (branch offices).  Traffic flows properly between the primary location and branch locations, however I have been unsuccessful at forcing all traffic at the branch locations to go through the tunnel. They will cross the tunnel only for LAN traffic at the primary location. Web traffic heads out the pfsense WAN port. My goal is to force all traffic at the branches through the vpn tunne...

Sonicwall DHCP Over VPN

Hello, We have a Sonicwall NSA 4500 that we use for a firewall, DHCP, and VPN. We are running into an issue with the DHCP over VPN because we can only set a pool of 250 addresses in the local L2TP IP pool. We have approximately 300 iPads that need to connect, however. Is there any way to expand the limits of the DHCP L2TP IP pool? Thanks for any help with this. ...

Design Apple Development Security Automobile Network Photography Health Money Travel Shopping Issues Operating systems Drivers Software Programming Tech Home Science Sport Solution