Internet Computer Mobile Games

Skype Works, Browser Doesn't

We seem to be having some DNS issues...

Skype works, browsers are working intermittently... some sites load fine, some don't, some work for a time.

Connected wirelessly, two other computers connected to the same router are hard-wired and working fine. Running on Windows 8.

We tried dns flush and it works for a little bit, than same problems again. Tried "netsh winsock r"... worked for a bit as well, but only temporarily. We're looking for a permanent fix...

Here's the ipconfig:

Windows IP Configuration

Host Name . . . . . . . . . . . . : gunner4life
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : lan

Wireless LAN adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hosted Network Virtual Adapter
Physical Address. . . . . . . . . : 52-B7-C3-3F-4C-45
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 12:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 12-B7-C3-3F-4C-45
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 50-B7-C3-3F-4C-46
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : B8-88-E3-6A-3B-E7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Qualcomm Atheros AR9485WB-EG Wireless Network Adapter
Physical Address. . . . . . . . . : 50-B7-C3-3F-4C-45
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::89cb:7628:bd66:6630%3(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.67(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, 30 June 2015 10:19:59 a.m.
Lease Expires . . . . . . . . . . : Wednesday, 1 July 2015 10:19:59 a.m.
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 333972378
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-78-9A-16-B8-88-E3-6A-3B-E7
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 15:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6abd:30a4:3207:3f57:febc(Preferred)
Link-local IPv6 Address . . . . . : fe80::30a4:3207:3f57:febc%8(Preferred)
Default Gateway . . . . . . . . . : ::
DHCPv6 IAID . . . . . . . . . . . : 251658240
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-78-9A-16-B8-88-E3-6A-3B-E7
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter isatap.lan:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Any help would be greatly appreciated!

Top similar posts to Skype Works, Browser Doesn't

App works on Windows Phone emulator, doesn't work on actual Phone

The title says everything, I was searching through google why this is the case but haven't been able to find any answers. Any reference would be greatly apreciated... ...

[all variants] Webcam stopped working with Skype, works with everything else

My webcam has (as of yesterday) stopped working with Skype on Kubuntu 14.04 . It says "no devices found" It works with everything else. A video device does not show in the Phonon audio and video settings though. trying to start Skype with LD_PRELOAD=/usr/lib/i386-linux-gnu/libv4l/v4l1compat.so gives me: ERROR: ld.so: object '/usr/lib/i386-linux-gnu/libv4l/v4l1compat.so' from LD_PRELOAD cannot be preloaded (failed to map segment from shared object): ignored. I tried reinstalling l...

Can't connect to certain games/applications but browser works

Hi, every night (around 1am - 3am) I suddenly can't connect to battle.net servers, steam servers, teamspeak and ventrilo. I have internet connection (browser and skype works for example). There is no "schedual rule" or anything on the modem, I have tried opening ports, updated firmware and done a factory reset on the modem, but the problem is still there. Problem affects all devices, so it's not something local on the computer, I have a feeling its my ISP that's ing up again, they...

Get analog (A0) with GPIO doesn't work (but works with mraa)

Hi everyone! I'm back with another problem. I'm currently trying to get analog input from A0 of my adruino breakout board.I've plugged my sensor between A0 and the 5v power supply. Everything works so far with the mraa library. But I'm trying to get the same result using GPIO. After some research about this topic I've found the great documentation from emutexlabs here .So I've followed all the steps of the section "Example 3: Configure IO14 as an ADC input" :   # echo 20...

Get analog (A0) with GPIO doesn't work (but works with mraa)

Hi everyone! I'm back with another problem. I'm currently trying to get analog input from A0 of my adruino breakout board.I've plugged my sensor between A0 and the 5v power supply. Everything works so far with the mraa library. But I'm trying to get the same result using GPIO. After some research about this topic I've found the great documentation from emutexlabs here .So I've followed all the steps of the section "Example 3: Configure IO14 as an ADC input" :   # echo 20...

FN function doesn't works

Hello my Fn button doesnt works, I meant I can't find driver in download list. Would u guys can help me? sorry for bothering Have a nice night/ day  Regards,...

iMac Intel 24" EMC 2267: Screen sometimes doesn't come on, but mirroring works 100%

I've had this iMac with the 4850 HD to the Apple Store and they claimed to have replaced just about every part from logic board to GPU. SOMETIMES when I try to turn on the iMac the screen doesn't come on. If I plug in an external display during this time, the external display works just fine. Comes on automatically and all. It was always my understanding that everything was linked since you can't on a working iMac disable the screen but leave external on. Apparently that's not true. Anyway, w...

this code works in one compiler, doesn't work in another

I was trying to populate an array using a pointer and it's given me a few results which I'm finding difficult to comprehend. I'm sorry for the long post, and I have tried to figure out the possible reasons, but every time I try something, it throws up something new.(Sorry also, for the smiley in the question, I didn't mean to put it there and am not able to edit it now, so let it be :) ) The array name 'l' used in the questions below signifies it's a local pointer - l for local. 1. This code w...

iPhone 5s: iPhone 5s home button works after repair but touch ID doesn't?

Hello, Thank You for taking some time to help me with my problem, after replacing the screen on my iPhone 5S the home button works but touch id does not (the option has disappeared from settings). Any help would be appreciated Jordan ⟐ Answered October 18, 2014 at 10:00 am -0700...

iPhone 5s: iPhone 5s home button works after repair but touch ID doesn't?

Hello, Thank You for taking some time to help me with my problem, after replacing the screen on my iPhone 5S the home button works but touch id does not (the option has disappeared from settings). Any help would be appreciated Jordan ⟐ Answer edited October 18, 2014 at 11:36 am -0700...

iPhone 5s: iPhone 5s home button works after repair but touch ID doesn't?

Hello, Thank You for taking some time to help me with my problem, after replacing the screen on my iPhone 5S the home button works but touch id does not (the option has disappeared from settings). Any help would be appreciated Jordan ⟐ Answered October 19, 2014 at 1:54 am -0700...

Support doesn't save browser password

So I tried everything and the phone won't save my browser password. The note 2 did it. But not my 4. I went to the browser settings and the save passwords is checked. I deleted my cache, still no joy. ...

XPosed, What works and what doesn't

I wanted to start a thread to give and gather information with the community on what works and doesn't with XPosed framework and Wanam XPosed. Please add any other information on what works and doesn't if you have been able to verify. So far I've verified a few things work on the T-Mobile Note 4. XPosed Torch YouTube AdAway XTether In Wanam XPosed I have verified the following working for me. Hide SFinder bar Hid Battery icon Change/Hide Carrier Label Enable 4 way reboot menu Screenshot / Powe...

AC and Heat works well, blows appropriately; Exhaust fan doesn't turn on

Hi Everyone, Purchased a home earlier this year. Phoenix, AZ; built in 1960. Has a newer AC unit outside. AC and heater components work very well. However, when I set the termostat switch to the Fan mode, nothing happens. Seems rather odd to me since I presume the fan turns on during the AC and heat modes. Any idea where to start diagnosing this? Have had issues with contractors recently, so I am of the mindset to do it myself where appropriate. Will post specifics about termostat, AC unit a...

Stock browser doesn't connect to mobile data.

Is anyone else having this issue? The stock browser won't connect no matter what site I try to use i can only use chrome or dolphin. I try google or Yahoo and it right away says error. And takes me to the no network page. It only weeks on Wifi anyone have any ideas? ...

Design Apple Development Security Automobile Network Photography Health Money Travel Shopping Issues Operating systems Drivers Software Programming Tech Home Science Sport Solution